An Experimental Study on Short Term Durability and Hardened Properties of Baggasse Ash and Fly Ash Based Geo Polymer Concrete

  • Mohammad Iliyas Mohammad Sayeed P.G. Student, Department of Civil Engineering, B.R. Harne College of Engineering and Technology, Mumbai, INDIA
  • Dr. Vikram A. Patil Project Guide and Principal, B.R. Harne College of Engineering and Technology, Mumbai, INDIA
  • Somanagouda R. Takkalaki Assistant Professor, Department of Civil Engineering, B.R. Harne College of Engineering and Technology, Mumbai, INDIA
Keywords: Baggase, Ash, Fly Ash, Geo Polymer, Concrete

Abstract

This project reports the comparison of bagasse ash and fly ash-bagasse ash based on geopolymer concrete. In which cement is fully replaced by pozzolanic material that is rich in silicon and aluminium like fly ash and bagasse ash referred to as “Geopolymer concrete” which is a contemporary material. Geopolymer concrete was actually manufactured by reusing and recycling of industrial solid wastes and by products. Fly Ash, a by-product of coal obtained from the thermal power plant is plenty available worldwide. Fly ash is used as ingredients in concrete which enhance the properties of concrete and utilization of fly ash is helpful for consumption. Bagasse ash is a final waste product of sugar obtained from the sugar mills. The base material, viz. fly ash and Bagasse ash, is activated by alkaline solution that is sodium hydroxide and sodium silicate to produce a binder which is rich in silica and aluminium. Sample 1 is cement.  It is replaced by 100% fly ash geopolymer concrete and trial 2 is 10%, 30% & 50% replaced by  Bagasse ash in Geopolymer concrete . The project presents the strength and durability of Bagasse ash based Geopolymer concrete and fly ash and Bagasse ash based Geopolymer concrete.

Downloads

Download data is not yet available.

References

Specification for Coarse & Fine Aggregates from Natural Sources for Concrete. (1970). 2nd Revision. Available at: https://www.iitk.ac.in/ce/test/IS-codes/is.383.1970.pdf.

Amit S. Kharadeetal. (2014). Waste product bagasse ash from sugar industry can be used as stabilizing material for expansive soils. International Journal of Research in Engineering and Technology, 03(03), 506-512.

T. S. Abdulkadir, D. O. Oyejobi, & A. A. Lawal. (2014). Evaluation of sugarcane bagasse ash as a replacement for cement in concrete works. Acta Tehnica Corviniensis – Bulletin of Engineering Tome, VII (2014), Fascicule 3, 71-76.

R. Srinivasan & K. Sathiya. (2010). Experimental study on bagasse ash in concrete. International Journal for Service Learning in Engineering, 5(2), 60-66.

M. R. Lavanya, B. Sugumaran, & T. Pradeep. (2012 Dec). An experimental study on the compressive strength of concrete by partial replacement of cement with sugarcane bagasse ash. International Journal of Engineering Inventions, 1(11), 1-4.

M. K. Yashwanth & B.G. Naresh Kumar. (2014). An experimental study on bagasse ash as replacement for cement in lightweight concrete. International Journal of Latest Trends in Engineering and Technology, 3(3), 253260.

P. J. Walker. (1995). Strength durability and shrinkage characteristics of cement stabilized soil blocks. Cement and Concrete Composites, 17(4), 301-310.

J. James & P.K. Pandian. (2015). Soil stabilization as an avenue for reuse of solid wastes: A review. Acta Technica Napocensis: Civil Engineering, 58(1), 50-76.

N. Degirmecnci. (2008). The using of waste phosphogypsum and natural gypsum in adobe stabilization. Construction and Building Materials, 22(6), 1220-1224.

S.R. Teixeira & A.E. Souza, C.I. (2014). Characterization of a wollastonite glass – ceramic material prepared using sugarcane bagasse ash (SCBA) as one of the raw materials. Available at: https://repositorio.unesp.br/handle/11449/130145.

Published
2021-02-27
How to Cite
Mohammad Iliyas Mohammad Sayeed, Dr. Vikram A. Patil, & Somanagouda R. Takkalaki. (2021). An Experimental Study on Short Term Durability and Hardened Properties of Baggasse Ash and Fly Ash Based Geo Polymer Concrete. International Journal of Engineering and Management Research, 11(1), 222-227. https://doi.org/10.31033/ijemr.11.1.30